← All posts

Engineering jobs in Australia for Pakistani engineers: PEC stamp first, $940 assessment next

Tips · 2026-11-20 · 8 min read

A delighted engineer in a white hard hat holds rolled drawings at a construction site with steel framing and a crane.

Engineering jobs in Australia for Pakistani engineers start with paperwork that Pakistan controls, not with the visa. Your engineering diploma, certificates and experience letters need the Pakistan Engineering Council (PEC) stamp before the Ministry of Foreign Affairs (MOFA) will attest them, and an Australian employer who sponsors you will want proof of exactly that experience. Then comes the assessing authority, which for engineers means Engineers Australia, and the visa itself.

Why the PEC stamp comes before everything else

MOFA says engineering diplomas, certificates and experience certificates must first be attested by the Pakistan Engineering Council. Without that first stamp, MOFA does not attest the document, and a document MOFA has not attested is hard to use for anything abroad.

The same MOFA page sets the order for other papers. Board (BISE) certificates are countersigned by the Inter Board Committee of Chairmen (IBCC) first, and university degrees are attested by the Higher Education Commission (HEC). So a BSc in civil, mechanical or electrical engineering usually needs two chains: the degree through HEC, and the engineering certificates and experience letters through PEC. Our guide to which body attests your trade before MOFA covers the same logic for electricians, chefs and mechanics.

The experience letter an employer actually reads

An Australian employer reads your experience letter as evidence of what you did, and so does the Department of Home Affairs. MOFA only attests experience certificates on the letter pad of the institute or department, with the named seal and signature of the Head of Human Resources. A plain page typed on a laptop will not pass.

Ask each past employer for a letter that lists your job title, your dates, and the actual work: design packages, site supervision, drawings, inspections, the software and equipment you used. That level of detail helps in three places at once: the PEC stamp, the skills assessment and the employer's own nomination.

Never let anyone invent or inflate a letter. Under section 18 of the Emigration Ordinance, 1979, forging emigration documents or getting someone to emigrate through fraud or wilful misrepresentation can bring imprisonment of up to fourteen years and a fine of up to two million rupees. We explain what that looks like in practice in our post on fake experience letters.

From PEC to MOFA: the order of stamps

DocumentFirst stampThen
Engineering diploma, certificates, experience lettersPakistan Engineering CouncilMOFA attestation
University degreeHigher Education CommissionMOFA attestation
Board (BISE) certificatesInter Board Committee of ChairmenMOFA attestation
Skills or technical certificatesLocal technical board and NAVTTCMOFA attestation

From 27 July 2026, MOFA does not accept apostille requests without prior online registration at apostille.mofa.gov.pk. Pakistan joined the Hague Apostille Convention, which also covers Australia and New Zealand, and the MOFA apostille fee is Rs. 3,000 per document for personal and educational documents. Our apostille guide walks through registration, fees and offices. The official list is on the MOFA attestation page.

Engineers Australia: which assessment and what it costs

Home Affairs only accepts a skills assessment from the relevant assessing authority, and the combined list of eligible skilled occupations names that authority for each occupation. For most engineering occupations that is Engineers Australia, so look up your occupation on the Home Affairs occupation list before you pay anyone.

Engineers Australia publishes two price points. Its standard Competency Demonstration Report (CDR) assessment costs $940 excluding GST, and a fast-track fee of $360 can be added. A qualification assessment under the Washington, Sydney or Dublin Accord costs $505 excluding GST. Which route applies to your degree is for Engineers Australia to decide, so read its pages for your qualification before choosing, and remember each authority sets its own procedures, timeframes and charges.

Engineers from the Gulf face the same two prices; JobsAbroad UAE's guide to the $940 or $505 choice is useful if you work in Dubai, Abu Dhabi or Sharjah today.

The 482 visa rules that matter for engineers

The Skills in Demand visa (subclass 482) is a temporary visa that lets an employer sponsor a suitably skilled worker for a position they cannot fill locally. In the Core Skills stream the worker must be nominated for an occupation on the Core Skills Occupation List (CSOL) and paid at least the Annual Market Salary Rate for that occupation and no less than the Core Skills Income Threshold.

Applicants need at least 1 year of relevant work experience in the nominated occupation or a related field, gained within the last 5 years; part-time or casual work must add up to at least 12 months full-time. That is why dated, detailed experience letters matter so much.

Some primary applicants must also hold a mandatory skills assessment, and it has to be started before the visa application is lodged or the application is not valid. Whether yours is mandatory depends on the occupation, so check the Core Skills stream page. Our 482 visa guide for Pakistan and the post on the four stages of a sponsored job explain the employer's side.

The permanent route is different. The Skilled Independent visa (subclass 189) needs an occupation on the relevant skilled occupation list, a suitable skills assessment, an invitation to apply and a pass mark on the points test.

How to prepare, in order

  1. Find your occupation on the combined skilled occupation list and note the assessing authority and which list it sits on.
  2. Collect experience letters on company letterhead, each signed by the Head of Human Resources and listing duties and dates.
  3. Take engineering diplomas, certificates and letters to PEC, and your degree to HEC, before going to MOFA.
  4. Choose the Engineers Australia route that fits your degree and budget the fee in Australian dollars.
  5. Update your CV so every job shows dates, projects and tools; Build AI CV can help you shape it in English.
  6. Apply to employers who state sponsorship, and keep copies of every document and reply.

Where engineers fit among live jobs

Browse the full list of sponsored jobs on this site and filter for engineering and trade roles. At the time of writing, one example is a piping engineering draftsperson role in Perth. Vacancies open and close constantly, and every listed employer is prepared to sponsor an overseas worker.

The Pakistani community is already strong in professional work: in the 2021 Census, 14,008 employed Pakistan-born people in Australia (30.0%) were Professionals. See our 7-step document file and the post on what to have ready before an employer says yes.

Common mistakes

  • Going straight to MOFA. Engineering papers need the PEC stamp first, so a skipped step means a rejected document.
  • Vague experience letters. A letter with no duties or dates does not prove a year of experience in the last five.
  • Paying before checking the authority. Look up the assessing authority for your exact occupation before you pay any fee.
  • Lodging first. If a mandatory skills assessment applies, it must be started before the visa application or the application is not valid.
  • Paying a middleman for a job. Never pay anyone for a job offer or sponsorship; it is against Australian and New Zealand rules and can lead to a refused visa.

Frequently asked questions

Do Pakistani engineers need a skills assessment for Australia?

It depends on the occupation and the visa. Some 482 applicants must have a mandatory assessment, and the 189 visa requires a suitable assessment. Check your occupation on the Home Affairs list, which names the assessing authority.

Which body stamps engineering certificates in Pakistan?

MOFA says engineering diplomas, certificates and experience certificates must first be attested by the Pakistan Engineering Council. University degrees go through the Higher Education Commission before MOFA.

How much does the Engineers Australia assessment cost?

Its standard CDR assessment costs $940 excluding GST, with an optional $360 fast-track fee. The Washington, Sydney or Dublin Accord qualification assessment costs $505 excluding GST. Check the current fee page before you pay.

How much experience does a 482 applicant need?

At least 1 year of relevant experience in the nominated occupation or a related field, gained within the last 5 years. Part-time or casual work must add up to at least 12 months full-time.

Can I apply from Saudi Arabia or the UAE?

Yes. Pakistanis working in Saudi Arabia or the UAE can still apply, because neither visa requires you to be in Australia or New Zealand when you apply. A police certificate from the Gulf country may also be needed if you lived there long enough.

Key takeaways

  • Get the PEC stamp on engineering papers before MOFA attestation.
  • Experience letters need letterhead, a Head of HR signature, duties and dates.
  • Engineers Australia charges $940 for the standard assessment and $505 for the Accord route, excluding GST.
  • A 482 applicant needs at least 1 year of recent relevant experience.
  • Start any mandatory assessment before lodging the visa application.

#engineering jobs in australia #pakistani engineers australia #pec attestation #engineers australia assessment #482 visa #civil engineer australia #engineer jobs new zealand #visa sponsorship

Keep reading

All articles